Date

Home Improvements

Make your home beautiful, with a few little tweaks.
Breast Cancer Ribbon

Archive for December, 2009

For Drought Resistant Grass, the Winter Mowing Hiatus Reforms Bad Habits

posted by:

Author: Mr. Hank

While there are varieties of relatively drought resistant grass available, every summer brings challenges to your dreams of a lush, green carpet of grass. Many of these challenges are self-inflicted by homeowners with serious misunderstandings about what is best (and worst) for their grass.

Now that the mowers are safely nestled in their garage cocoons for a few months, it’s time for a little rehab, a little reforming of bad lawn care habits. There’s not a lot you can do when a June drought hits and water restrictions make the front-page of the newspaper. However, by understanding the nature of grass, you can do a lot to avoid making the situation worse.

Drought resistant grass begins at the beginning.
Depending on your region, there are grasses that are likely to do well, and grasses that don’t have a fighting chance of survival. Choose the right kind, and your grass will use water efficiently. Choose the wrong kind, and your grass will slurp up every drop and beg for more.

Timing is important, too.
When you water your lawn is at least as important as how often you water it. The advice to water early in the day is not just a practical joke perpetrated by coffee companies hoping to increase sales among sleepy waterers. One reason an early morning drink does wonders for your grass is that there’s generally less wind to interfere with absorption. Also, even in the hottest climates, the early morning hours are the coolest part of the day. This means less of the water you intend for your grass will evaporate before it soaks into the ground.

Watering in the middle of the night is not recommended either, due to the increased risk of promoting diseases. When water sits and doesn’t dry off the surface it creates a breeding ground for many common turf diseases. In an early morning irrigation cycle the surface begins the drying process as the sun comes up and air movement starts to increase.

Frequency is another issue.
A good long soak now and then beats a quick splash on the run every day. The reason is that roots grow deeper when they can linger over a nice long drink of water. Deep roots mean drought resistant grass. Shallow roots have no chance against the burning sun – and are most commonly caused by shallow, frequent watering.

Take it easy on the mower.
Like a 10-year old boy with a crew cut, it’s tempting to scalp your yard down to the peach fuzz state, thinking you’ll buy yourself an extra Saturday with no mowing on your to do list. But it doesn’t work that way. Cutting your grass too short is a sure way to end up with shallow roots, too. While setting your mower to leave your lawn a healthy link means you’ll need to mow more often to keep it looking manicured, at least you won’t be mowing dead, brown, scorched grass. Keep in mind that long shoots (leaf blades) = long roots. While in the midst of a drought, resist mowing at all or at least reduce your frequency and raise the height for a healthier and better looking stand of grass.

Bag the bag.
Your lawn will thrive on the nitrogen it can draw from grass clippings. While every lawn needs to be fed, that doesn’t always mean you need to feed it commercial fertilizer. By leaving your mulched clippings on the ground, you can cut your fertilizer use by about a third. Decomposing clippings left by a mulching mower can help save and retain some moisture as well. Use common sense if the lawn is extra long it is not advisable to leave clumps of clippings. You should never fertilize your yard during a drought, anyway. It’ll only stimulate growth that can’t be sustained because of the drought.

Follow these tips for cultivating drought resistant grass, and by the time it’s time for watermelon and lemonade, you’ll be able to enjoy it while sitting on your lovely green lawn. Keep in mind that these are generalizations and can vary due to individual growing conditions, slopes and soil types.

About the Author:

To learn more about the high quality sod grass that Modern Turf grows in South Carolina visit their website at http://www.moderntuf.com. Schedule a consultation today to end your search for the perfect high-quality sod- the most durable grass you have ever worked with, guaranteed

Article Source: ArticlesBase.comFor Drought Resistant Grass, the Winter Mowing Hiatus Reforms Bad Habits

Renewable Energy Technology Has Lots of Potential

posted by:

Author: Energy 4 Earth

The four most important renewable energy technologies – solar, wind, hydrogen and biomass have lots to offer. Wind power is seen as having the maximum potential in terms of development and investment. It has generated interest in the governments and people because if its cost-effectiveness in producing electricity. Some of the countries which are embracing wind power on a huge level are Spain, Germany, India, America and China. The renewable energy sources are replenish-able and will never run out. The maximum amount of renewable energy comes from sun and the solar energy can be directly used for heating and lighting the houses and even business premises.

Did you know that sun is also responsible for varying patterns of wind, which is then captured by the wind turbine? In present scenario where pollution is at its peak and we are breathing polluted air along with coping with the global warming effects, using renewable energy technology is important as not only it has environmental benefits, it also saves you tons of money.

Renewable energy technologies are clean and have extremely low environmental effect in contrast to the conventional technologies. Most of the homes today use fossil fuels generated grid power as a source of electricity. However, with increased awareness people have started concentrating on solar power systems and wind turbines. The wind turbines are mounted on high tower so as to capture as much wind as possible. The turbine captures wind with the help of blades. Usually 3 blades are present in a turbine. When the wind blows, low pressure is formed just below the blades, which causes the rotor below the turbine to turn.

If you want a detailed plan you can go on the Internet and get one. There are many manuals which have these instructions. Buy that manual which gives clear instructions.

About the Author:

The author has been into saving energy from past 5 years and now he invites you to understand how to save energy at home, at his website Renewable Energy 4 Earth. If you save energy, then you indirectly save money apart from reducing expenditures. Read more about the this concept, by visiting the renewableenergy4earth.com today.

Article Source: ArticlesBase.comRenewable Energy Technology Has Lots of Potential

Understanding Low Energy Lighting

posted by:

Author: Gen Wright
Low Energy lighting is becoming ever more popular. Current UK Building Regulations demand that approximately 30% of lighting in new developments is now dedicated low energy, and in existing housing stock the use of high wattage standard incandescent lamps is being phased out. But, amidst mounting pressure from the government to move from standard light bulbs to energy saving alternatives, very few householders seem to understand how low energy lighting differs from conventional lighting systems? The key to understanding the difference lies in knowing how conventional light bulbs work.

The correct term for the type of conventional light bulb that we all recognise is a tungsten, or incandescent bulb. They use a tiny filament made of tungsten, which when heated gives off a bright light. However, the problem with these bulbs is that they are not energy efficient, as a lot of energy is required to heat the filament to the level required to give off the light. Tungsten bulbs come in a variety of different shapes and sizes, with a number of different caps. The standard life of a tungsten lamp is around one thousand hours. The most common wattage is 60 Watts.

Another existing style of bulb is the halogen. Halogen lamps have very small filaments filled with halogen gas. They run at extremely high temperatures. They are most suited to small, bright or decorative fittings. Halogen lamps are generally slightly more efficient than tungsten bulbs, and the standard life of a halogen bulb is around twice as long at an average of two thousand hours. Halogen bulbs can be spit into two types – those that run off of 240v mains voltage, and low (12v) voltage. The term low voltage should not be confused with low energy. Low voltage lamps require a transformer to reduce the voltage. Halogen lamps do get very hot and they should never be handled until they have cooled fully.

Low energy lamps are also known as fluorescent lamps. The fluorescent lamp is actually a low-pressure gas discharge which is held in a cylindrical shaped tube. This tube is covered with a phosphor coating. As the gas discharges, it produces ultra-violet radiation that is converted into visible light by the phosphor coating. Early fluorescent lamps suffered from a flickering effect and indeed a buzzing noise that was produced, but advances in technology have all but eliminated these problems by using high-frequency electronic ballasts. Low energy lamps can last up to 8000 hours, and offer major savings in energy consumption.

Broadly speaking, one Watt of a low energy lamp is equivalent to 5 Watts in a standard tungsten incandescent. Therefore a low energy lamp rated at 15W is equivalent to a 75W traditional bulb. Early low energy fittings had a reputation for taking some time to reach their full brightness from switching on, but this lag has now been reduced to a couple of seconds. One drawback with low energy fittings that remains however is that very few lamps work with dimmer switches.

Another factor that should be considered is that any broken low energy lamps should be double wrapped in plastic bags and carefully disposed of, as they do contain very small amounts of mercury (which is not at all dangerous when contained within the bulb). The bulbs should be disposed of responsibly and can either be collected in a normal household waste bin or can be recycled at the local council’s Household Waste and Recycling Centre or at collection points provided by some light bulb retailers.About the Author:

For expert advice on low energy lighting and a friendly service visit PBSL. Who offer a competitive and comprehensive range of builders materials, including Plastic Guttering, Drainage Pipe, Solar Panels, and Doors.

Article Source: ArticlesBase.comUnderstanding Low Energy Lighting

Breathe Fresh Air by Introducing Air Conditioning

posted by:

Author: Terry Metcalfe
They say that the air we breathe indoors is usually more dangerous and full of pollutants than the air outdoors, and as difficult as many people find that claim to be it is true, and it demonstrates what an important task it is to control and guarantee the quality of the air inside our homes. Not only from the perspective of air cleanliness, but also in terms of creating a pleasant indoor environment, regulating the air within a home is a serious chore that can translate into a very significant home improvement job. Between having an old unit removed and a new one installed and configured properly, a home owner can become a bit overwhelmed with the whole home improvement project, which is why it is always a good idea to get the help of a professional home improvement contractor to do the job right.

There are lots of companies out there on the market offering to provide such services, and many companies are specifically and solely dedicated to removing and installing HVAC units. Hiring the services of such a company is a good bet, as some contractors that claim to do a truly wide variety of home-related services end up providing mediocre services (or worse) and lack the necessary expertise. And considering that a new air unit is a major monetary investment and a physically large object that presents certain logistic issues, it’s best to go the safe route in this regard to keep the project from stretching out longer than necessary.

For HVAC fixes that don’t require a new unit to be installed but rather for a present unit at home to be fixed up by a technician or engineer, make sure to hire the services of somebody with American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE) accreditation. This is the professional organization that in the US (and in many foreign countries) monitors and helps regulate the HVAC industry, and any reliable engineer that can fix air units is likely to be (or should be) a member of ASHRAE.

As far as knowing how to pick the right unit is concerned, home owners should keep a few issues in mind: first of all, that the unit is energy efficient; secondly, that it is of a reasonable size and able to meet the environment demands of a home with the size of theirs; and thirdly, that the price is not too extraordinary.

The most trusted energy efficiency rating provider out there at the moment is Energy Star, which is a government backed group that is widely considered to be the top authority on the matter. When buying an air unit at the store, try to stick with units that have a favourable rating from Energy Star. Of course, greater energy efficiency does imply a higher original price tag, but in many cases the increase is not that ridiculous and when you think about it the difference will be made up in a few short months with more manageable utilities bills.

About the Author:
Terry Metcalfe writes on behalf of Trade Radiators specialists in high quality designer radiators and heated towel rails.

Article Source: ArticlesBase.comBreathe Fresh Air by Introducing Air Conditioning

House Cleaning

posted by:

Author: Ben Kaylor

Professional Carpet Cleaning Services are a great way to remove odors, tough stains and dirt from carpets. If you have carpet you will have stains. Red wine, coffee, pet urine, vomit and mud are hard to remove on your own. If you are facing a tough stain it is important to clean the area using a commercial carpet stain treatment product. First dab the area to pick up the liquid. Then spray on the commercial spot treatment product dab or gently work it into the carpet fibers. Finally rinse with cold water and dry with a clean towel. This immediate action will help to remove the stain and prevent permanent damage. You can repeat the process until the stain is completely removed. Choosing to follow these steps upon immediate notice of the stain will help to prevent the stain from reaching the carpet padding and stop odors. Carpets will get dirty, stains will happen. We recommend hiring a professional carpet cleaning service once a year to extend the life and service of your carpets.

Tile and Grout Cleaning Services are perfect for kitchens, bathrooms and laundry rooms. Tile is easy to clean but it is removing the dirt from grout that requires time and attention. Grout requires a commercial cleaner and warm water. Grout absorbs all the dirt and spills it can also grow mildew. Home owners who are looking to preserve the clean appearance of their floors and tile should plan to mop regularly and clean with a stronger cleaning product like Oxi Clean for their grout. Professional tile and grout cleaning companies have the ability to provide you with whole house cleaning specials at great prices.

Natural Products like Oxi Clean, make use of non-toxic, green and safe chemicals that work great in cleaning carpets, tile or other surfaces in your home. Natural products are safer to use around children or pets and have proven to be great natural cleaners. If you plan to use natural products try looking for one that does not leave residue, offers antimicrobial treatment and will not stain fabrics or carpet.

Cleaning your house regularly will help to extend the life of your carpet, create better looking floors and prevent odors and bacteria from forming. Professionals are affordable, from maid services to carpet cleaning you can hire a company for cleaning services at a great price. If you are interested in local services visit our website, Tampa House Cleaning.

About the Author:

Article Source: ArticlesBase.comHouse Cleaning